Automotive & Electronics Vent Membrane

short description:

PRODUCT NAME: Non-PFAS Vent Membrane

PRODUCT MODEL: AYN-TT05NF50

PRODUCT DESCRIPTION: Vent membrane without PFAS

APPLICATION FEILD: Automotive / Electronics, etc.

APPLICATION PRODUCTS: /

Send email to us

Product Detail

Product Tags

Technical Data Sheet

PRODUCT NAME	Automotive & Electronics Vent Membrane
PRODUCT MODEL	AYN-TT30S50
PRODUCT DESCRIPTION	e-PTFE Hydrophobic breathable membrane
APPLICATION FEILD	Automotive & Electronics
APPLICATION PRODUCTS	/

Membrane Properties

PHYSICAL PROPERTIES	REFERED TEST STANDARD	UNIT	TYPICAL DATA
Membrane Color	/	/	White
Membrane Construction	/	/	PTFE / PET non-woven
Membrane Surface Property	/	/	Hydrophobic
Thickness	ISO 534	mm	0.18±0.05
Interlayer Bonding Strength (90 degree peel)	Internal Method	N/inch	>2
Min Air Flow Rate	ASTM D737	ml/min/cm²@ 7Kpa	>2500
Typical Air Flow Rate	ASTM D737	ml/min/cm²@ 7Kpa	3000
Temporary Water Entry Pressure	ASTM D751	KPa	>60
Water Entry Pressure (Dwell 30s)	ASTM D751	KPa for 30 sec	>30
IP Rating	IEC 60529	/	IP68
Water Vapor Transmission Rate	GB/T 12704.2	g/m²/24h	＜5000
Oleophobic Grade	AATCC 118	Grade	NA
Operation Temperature	IEC 60068-2-14	℃	-40℃～125℃
ROHS	IEC 62321	/	Meet ROHS Requirements
REACH SVHC	REACH 1907/2006/EC	/	Meet REACH Requirements

合并表格 · 统一字号

Application

Shelf life is five years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.

The membrane can balance inside/outside pressure differentials of sealed enclosures while blocking contaminants, which could increase components’ reliability and extend their service life.

Shelf Life

Shelf life is five years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.

Note

All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.

All technical information and advice given here is based on Aynuo’s previous experiences and test results. Aynuo gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.

Material may not be reproduced or distributed in any form without written permission.

Previous: Non-PFAS Vent Membrane AYN-TT05NF50

Next: Automotive & Electronics Vent Membrane

Write your message here and send it to us