Non-PFAS Vent Membrane AYN-TT05NF50
| PHYSICAL PROPERTIES
|
REFERED TEST STANDARD
|
UNIT
|
TYPICAL DATA
|
| Membrane Color
|
/ | / | White
|
| Membrane Construction
|
/ | / | PO/PET nonwoven
|
| Membrane Surface Property
|
/ | / | Hydrophobic
|
| Thickness
|
ISO 534 | mm | 0.22±0.05 |
| Interlayer Bonding Strength (90 degree peel)
|
Internal Method
|
N/inch |
>2 |
| Min Air Flow Rate
|
ASTM D737
|
ml/min/cm²@ 7Kpa | >300 |
| Typical Air Flow Rate
|
ASTM D737
|
ml/min/cm²@ 7Kpa | 500 |
| Temporary Water Entry Pressure
|
ASTM D751
|
KPa | >250 |
| Water Entry Pressure (Dwell 30s)
|
ASTM D751
|
KPa for 30 sec | >200 |
| IP Rating
|
IEC 60529 | / | IP68 |
| Water Vapor Transmission Rate
|
GB/T 12704.2
|
g/m2/24h | ＜5000 |
| Oleophobic Grade
|
AATCC 118 | Grade | NA |
| Operation Temperature
|
IEC 60068-2-14 | ℃ | -40℃～130℃ |
| ROHS
|
IEC 62321 | / | Meet ROHS Requirements
|
| REACH
SVHC |
REACH
1907/2006/EC |
/ | Meet REACH Requirements
|
Shelf life is five years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on Aynuo’s previous experiences and test results. Aynuo gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
